Эмулятор NCam для Enigma 2

[Administrator]

[Impact]Ncam 7.9 compiled and patched by marouan & RAED[/Impact]

-[dvbapi + streamserver] Added future audio stream types for ATSC (currently not activated)
-[streamserver] Separate PAT and PMT searching from PowerVu descrambling
-[streamserver] Added 'Caid' setting in the stream relay configuration
(From now on the stream relay accepts a caid setting via the webif. The relay will be enabled only for the caid(s) specified.
Channels with caids other than those specified in this setting will be descrambled via the dvb-api.
An empty setting means the stream relay will be not used at all.)
-(This unconventional encryption system (data are XOR-ed with a dynamic key) works only via the Stream Relay option.
Refer to the wiki for more information on how to configure OSCam-Emu for use with Compel.)
Посмотреть вложение 3Посмотреть вложение 2Посмотреть вложение 1

 

[Administrator]

[Impact]Ncam v 8.0 compiled and patched by marouan & RAED[/Impact]

-Tryfix for Powervu EMU
-fix orf cards (0D98) au if global is blocked
-Better stream type identification based on descriptors
(NCam now detects the type of each stream pid (video, audio, subtitle, etc) based, not only on the "stream_type" value in the PMT, but on the stream descriptors as well. Stream type detection is crucial when using the extended cw and this patch fixes many problems with PowerVu? channels which had no working audio streams. Stream type detection is now done once and is the same whether the "simple" cw or the extended cw are used.
all based on Nautilus7 great JOB !!!)
-created functions for detecting caid. "tandberg" is renamed to "director", because tandberg is the compary and director is the CA system
-add support for VideoGuard? BSkyB (0960) entitlement date
-[gbx] - fix oscam crash when enable ccc to gbx shareПосмотреть вложение 1

 

[Administrator]

[Impact]NCam 8.0-r0 .sh4 Emu -r784.[/Impact]

 

[Administrator]

[Impact]ncam 8.1 sh4 / mips by marouan & RAED[/Impact]

-Fix 1x fallthrough / break
-fix for NDS Standard cards
-Videoguard2 cleanup
-[streamserver] Added Rosscrypt1 support
-Add RossCrypt1 as supported caid
(This is not a functional change, as it works without this also. This is needed just to stop the 'decoding is waiting for matching readers' message in the livelog)
-Add Support (aarch64)Посмотреть вложение 1

 

[Administrator]

[Impact]ncam 8.3 sh4 / mips by marouan & RAED[/Impact]

-[powervu] Added support for hash mode 28-[streamserver] Better audio pid detection, similar to dvbapi
(For some stream types, parse the program element descriptors to determine whether the pid is audio or not.
This way much lower cpu power will be used (no unnecessary descrambling of other stream types).
This is also needed for Rosscrypt1 because the key finding algorithm depends on
accurate detection of video and audio pids) Посмотреть вложение 1

 

[Administrator]

[Impact]ncam 9.1 mips / sh4 by marouan & RAED[/Impact]Посмотреть вложение 1

 

[Administrator]

[Impact]ncam 9.2 mips / sh4 by marouan & RAED[/Impact]

-Improvement the emu
-Fixes detecte reader and file-keys of constant.cw
-[powervu] Added support for various hash modes (This includes hash modes 0, 0x0B, 0x0C, 0x0D, 0x0E and greater than 0x27)
Посмотреть вложение 1

 

[avts]

Ncam 9.3 compiled and patched by marouan & RAED
-[powervu] Added support for hash mode 31

Посмотреть вложение 1Посмотреть вложение 2Посмотреть вложение 3

 

[avts]

Ncam V 9.6

05-04-2019
-[powervu] Added support for modeCW 4 and modeUnmask 4
All Mipsel devices ipk install file
All ARM devices deb install file

 

[Administrator]

[Impact]Ncam v 9.7[/Impact]

-Rework on dvbapi to incrase the amount of descramblers
-Support for DVB-CISSA scrambling algorithm and 16 byte CWs

Get available descramblers in box and BISS2 related changes

* Instead of using a predefined number of descramblers (16 until now), oscam now gets the exact number of available descramblers in box.
* Skip cw checks for BISS2, similar to what is done for BISS1. BISS2 uses 16 byte cw, so some checks need to be skipped.
* Cosmetic changes including code refactoring, variable renaming and comment addition to several places.
Посмотреть вложение 1Посмотреть вложение 2Посмотреть вложение 3Посмотреть вложение 4Посмотреть вложение 5Посмотреть вложение 6

 

[Administrator]

ncam 9.8 mips / sh4 by marouan & RAED

-Add support dvbcissa-biss2
-Increased max demux to 32 and max filters to 64
-Decreased max ecm pids to 16 and emm pids to 16
-Decreased max stream indices to 8
-[dvbapi] Increased MAX_STREAM_INDICES back to 32
(It should be equal to MAX_STREAM_PIDS or else it creates problems with specific powervu channels. A better solution (with will also result in even lower number of descramblers needed for powervu channels) will be added in the future)
-[nemu] Dropped drecrypt & videoguard module
(No channel uses it anymore)
-fix bug in disablecrccws_only_for1Посмотреть вложение 1

 

[avts]

ncam 9.8 deb

All ARM devices deb install file

 

[Administrator]

[Impact]Ncam.config Files[/Impact]

24.04.2019 @fairmanПосмотреть вложение 1

 

[Administrator]

[Impact]Ncam config Files SH4 Only 26-04-2019[/Impact]

 

[avts]

Ncam V 9.9

02-05-2019
-[nemu] Pass complete rdr structure to emu_process_ecm()
(Also re-ordered arguments in powervu_ecm())
-remove duplicate debug dump of er->ecm
-fix bug in disablecrccws_only_for also in cacheex
-general disable checksum correction code optimization
-[powervu] Added new method for matching ECM and EMM keys
(Read the wiki for instructions on how to use it: https://github.com/oscam-emu/oscam-patched/wiki/PowerVU-config#matching-ecm-and-emm-keys-based-on-transponder-new-method---may-2019
This method is based on enigma2 namespace and it is only available for enigma2 and Tvheadend/VDR software for PC. Also, it does not work with stream relay)
-[dvbapi] Fix for stapi, coolapi, etc

All Mipsel devices ipk install file

All ARM devices deb install file

 

[avts]

Ncam.config Files
04.05.2019

 

[avts]

Ncam V 10.0

05-05-2019
-[streamserver + powervu] Use the new key method here as well
(We can get the tsid, onid and ens values from the service reference, so this is possible after all)
-Cosmetics to log messages

All Mipsel devices ipk install file
All ARM devices deb install file

 

[avts]

enigma2-plugin-softcams-ncam-V10.0-r2

Update

-Update ipk and deb files
-fix script install


Посмотреть вложение 1

 

[Administrator]

[Impact]Ncam 10.1 sh4 / mips by marouan & READ[/Impact]

-[biss] Increased variable size to avoid potential overflow
-[viaccess] Fixed CW checksum bytes for viaccess 2
-Added support for a higher number of demux devices in CA PMT
(Modern enigma2 boxes with FCB tuners can have many demux devices,
so a new CA PMT descriptor that allows up to 128 demuxes (descriptor tag 0x86) is now supported.
Also, the get_demux_options() function is completely re-written,
so it doesn't care for the order of descriptors inside the CA PMT message)Посмотреть вложение 1

 

[avts]

Ncam 10.1 deb. compiled and patched READ

All ARM devices deb install file